簡介 Brief Introduction
QL100型離合器試驗臺可進行安裝于曲軸和變速器主軸上的摩托車、ATV用手操縱濕式多片離合器、自動離心濕式多片離合器、自動離心式蹄塊離合器等形式離合器的性能及耐久試驗，是離合器生產廠產品質量控制、出廠檢驗和整車組裝廠整機開發研究、產品進廠驗收等工作的專用設備。
QL100 Model Clutch Test Bench mainly tests the performances anddurability of clutched in the form of hand control wet multi-disk clutch,automatic centrifugal wet multi-disk clutch, and automatic centrifugal shoeclutch that are mounted on the crank or the transmission main shaft formotorcycle or ATV. It is a kind of special equipment for the product qualitycontrol and delivery inspection for clutch manufacturer as well as the wholemachine D&R and product inspection before acceptance for whole motorcycleassembling factory.
二、測試產品 Test Production
手操縱濕式多片離合器 manual control hydraulic clutch with multipled laminated disk
自動離心濕式多片離合器 automatic centrifugal hydraulic clutch with multipled laminateddisk
自動離心式蹄塊離合器 aotomatic centrifugal ungulate clutch
三、測試依據
QC/T 66－93《摩托車離合器技術條件》
四、主要測試項目
1. 手操縱濕式多片離合器性能試驗
?。?/span>1）靜摩擦力矩及靜摩擦系數的測量
?。?/span>2）動摩擦力矩及動摩擦系數的測量
?。?/span>3）**傳遞扭矩值的測量
?。?/span>4）軸向壓緊力的測量
2. 自動離心濕式多片離合器性能試驗
（1）最低結合轉速的測試
?。?/span>2）不同轉速下的失速扭矩
3. 自動離心式蹄塊離合器性能試驗壓力特性
（1）最低結合轉速的測試
?。?/span>2）不同轉速下的失速扭矩
4. 各類離合器耐久磨損試驗
